You're reading an old version of this documentation. For the latest released version, please have a look at v5.0.2.

Output Group

Group /output

LAST_STATE_Y

Full state vector at the last time point of the time integrator if \(\texttt{WRITE_SOLUTION_LAST}\) in \(\texttt{/input/return}\) is enabled

Type: double

LAST_STATE_YDOT

Full time derivative state vector at the last time point of the time integrator if \(\texttt{WRITE_SOLUTION_LAST}\) in \(\texttt{/input/return}\) is enabled

Type: double

LAST_STATE_SENSY_XXX

Full state vector of the XXX th sensitivity system at the last time point of the time integrator if \(\texttt{WRITE_SENS_LAST}\) in \(\texttt{/input/return}\) is enabled

Type: double

LAST_STATE_SENSYDOT_XXX

Full time derivative state vector of the XXX th sensitivity system at the last time point of the time integrator if \(\texttt{WRITE_SENS_LAST}\) in \(\texttt{/input/return}\) is enabled

Type: double

Group /output/solution

SOLUTION_TIMES

Time points at which the solution is written if \(\texttt{WRITE_SOLUTION_TIMES}\) in \(\texttt{/input/return}\) is enabled

Unit: \(\mathrm{s}\)

Type: double

Group /output/solution/unit_XXX

SOLUTION_BULK

Interstitial solution as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_PARTICLE

Mobile phase solution inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\)

Type: double

SOLUTION_PARTICLE_PARTYPE_XXX

Mobile phase solution inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\)

Type: double

SOLUTION_SOLID

Solid phase solution inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{SP}}^{-3}\)

Type: double

SOLUTION_SOLID_PARTYPE_XXX

Solid phase solution inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{SP}}^{-3}\)

Type: double

SOLUTION_FLUX

Flux solution as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}^{-2}\,\mathrm{s}^{-1}\)

Type: double

SOLUTION_VOLUME

Volume solution

Unit: \(\mathrm{m}^{3}\)

Type: double

SOLUTION_OUTLET

Tensor of solutions at the unit operation outlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_INLET

Tensor of solutions at the unit operation inlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_OUTLET_COMP_XXX

Component XXX of the solution at all outlet ports of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_INLET_COMP_XXX

Component XXX of the solution at all inlet ports of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_OUTLET_PORT_XXX

All components at outlet port XXX of the solution of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_INLET_PORT_XXX

All components at inlet port XXX of the solution of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_OUTLET_PORT_XXX_COMP_YYY

Component YYY at outlet port XXX of the solution of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple outlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLUTION_INLET_PORT_XXX_COMP_YYY

Component YYY at inlet port XXX of the solution of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple inlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\)

Type: double

SOLDOT_BULK

Interstitial solution time derivative as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_PARTICLE

Mobile phase solution time derivative inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_PARTICLE_PARTYPE_XXX

Mobile phase solution time derivative inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_SOLID

Solid phase solution time derivative inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_SOLID_PARTYPE_XXX

Solid phase solution time derivative inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{SP}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_FLUX

Flux solution time derivative as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}^{-2}\,\mathrm{s}^{-2}\)

Type: double

SOLDOT_VOLUME

Volume solution time derivative

Unit: \(\mathrm{m}^{3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_OUTLET

Tensor of solution time derivatives at the unit operation outlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_INLET

Tensor of solution time derivatives at the unit operation inlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_OUTLET_COMP_XXX

Component XXX of the solution time derivative at all outlet ports of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_INLET_COMP_XXX

Component XXX of the solution time derivative at all inlet ports of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_OUTLET_PORT_XXX

All components at outlet port XXX of the solution time derivative of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_INLET_PORT_XXX

All components at inlet port XXX of the solution time derivative of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_OUTLET_PORT_XXX_COMP_YYY

Component YYY at outlet port XXX of the solution time derivative of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple outlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

SOLDOT_INLET_PORT_XXX_COMP_YYY

Component YYY at inlet port XXX of the solution time derivative of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple inlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\)

Type: double

LAST_STATE_Y

State vector of this unit at the last time point of the time integrator if \(\texttt{WRITE_SOLUTION_LAST_UNIT}\) in \(\texttt{/input/return/unit_XXX}\) is enabled. Note that the vector includes the dedicated inlet DOFs at the beginning (length: \(\texttt{NCOMP} \cdot \texttt{NPORT}\)).

Type: double

LAST_STATE_YDOT

Time derivative state vector of this unit at the last time point of the time integrator if \(\texttt{WRITE_SOLUTION_LAST_UNIT}\) in \(\texttt{/input/return/unit_XXX}\) is enabled. Note that the vector includes the dedicated inlet DOFs at the beginning (length: \(\texttt{NCOMP} \cdot \texttt{NPORT}\)).

Type: double

Group /output/sensitivity/param_XXX/unit_YYY

SENS_BULK

Interstitial sensitivity as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_PARTICLE

Mobile phase sensitivity inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_PARTICLE_PARTYPE_XXX

Mobile phase sensitivity inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_SOLID

Solid phase sensitivity inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_SOLID_PARTYPE_XXX

Solid phase sensitivity inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{SP}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_FLUX

Flux sensitivity as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}^{-2}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_VOLUME

Volume sensitivity

Unit: \(\mathrm{m}^{3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_OUTLET

Tensor of sensitivities at the unit operation outlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_INLET

Tensor of sensitivities at the unit operation inlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_OUTLET_COMP_XXX

Component XXX of the sensitivity at all outlet ports of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_INLET_COMP_XXX

Component XXX of the sensitivity at all inlet ports of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_OUTLET_PORT_XXX

All components at outlet port XXX of the sensitivity of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_INLET_PORT_XXX

All components at inlet port XXX of the sensitivity of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_OUTLET_PORT_XXX_COMP_YYY

Component YYY at outlet port XXX of the sensitivity of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple outlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENS_INLET_PORT_XXX_COMP_YYY

Component YYY at inlet port XXX of the sensitivity of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple inlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_BULK

Interstitial sensitivity time derivative as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_PARTICLE

Mobile phase sensitivity time derivative inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_PARTICLE_PARTYPE_XXX

Mobile phase sensitivity time derivative inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_SOLID

Solid phase sensitivity time derivative inside the particles as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if just one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{MP}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_SOLID_PARTYPE_XXX

Solid phase sensitivity time derivative inside the particles of type XXX as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage. Only present if more than one particle type is defined.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{SP}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_FLUX

Flux sensitivity time derivative as \(n_{\text{Time}} \times \texttt{UNITOPORDERING}\) tensor in row-major storage

Unit: \(\mathrm{mol}\,\mathrm{m}^{-2}\,\mathrm{s}^{-2}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_VOLUME

Volume sensitivity time derivative

Unit: \(^{3}\,\mathrm{s}\mathrm{m}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_OUTLET

Tensor of sensitivity time derivatives at the unit operation outlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_INLET

Tensor of sensitivity time derivatives at the unit operation inlet with components as columns in time-port-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are both disabled. If the unit operation only has a single port, the port-dimension is removed if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_OUTLET_COMP_XXX

Component XXX of the sensitivity time derivative at all outlet ports of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_INLET_COMP_XXX

Component XXX of the sensitivity time derivative at all inlet ports of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is enabled and \(\texttt{SPLIT_PORTS_DATA}\) is disabled. If the unit operation only has a single port, a vector (1D array) is returned instead of a matrix if \(\texttt{SINGLE_AS_MULTI_PORT}\) is disabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_OUTLET_PORT_XXX

All components at outlet port XXX of the sensitivity time derivative of the unit operation as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_INLET_PORT_XXX

All components at inlet port XXX of the sensitivity time derivative of the unit operation inlet as matrix in time-major storage. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) is disabled and \(\texttt{SPLIT_PORTS_DATA}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_OUTLET_PORT_XXX_COMP_YYY

Component YYY at outlet port XXX of the sensitivity time derivative of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple outlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

SENSDOT_INLET_PORT_XXX_COMP_YYY

Component YYY at inlet port XXX of the sensitivity time derivative of the unit operation. Only present if \(\texttt{SPLIT_COMPONENTS_DATA}\) and \(\texttt{SPLIT_PORTS_DATA}\) are enabled, and the unit operation has multiple inlet ports. If the unit operation only has a single port, the field is created if \(\texttt{SINGLE_AS_MULTI_PORT}\) is enabled.

Unit: \(\mathrm{mol}\,\mathrm{m}_{\mathrm{IV}}^{-3}\,\mathrm{s}^{-1}\,[\mathrm{Param}]^{-1}\)

Type: double

/output/coordinates/unit_XXX

AXIAL_COORDINATES

Axial coordinates of the bulk discretization nodes

Unit: \(\mathrm{m}\)

Type: double

Length: \(\texttt{NCOL}\)

RADIAL_COORDINATES

Radial coordinates of the bulk discretization nodes (only for 2D unit operations)

Unit: \(\mathrm{m}\)

Type: double

Length: \(\texttt{NRAD}\)

PARTICLE_COORDINATES_XXX

Coordinates of the particle discretization nodes in particles of type XXX

Unit: \(\mathrm{m}\)

Type: double

Length: \(\texttt{NPAR}\)